FixVault
Home › Chevrolet › 2001 › Silverado 1500 HD, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.8L, 5.3L, And 6.0L - Repair Instructions › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Top Engine Cover
    GM665886Courtesy of GENERAL MOTORS COMPANY
  1. Loosen the fasteners from the intake manifold sight shield .
  2. Remove the sight shield.
  3. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
    4. Fig 2: Intake Manifold MAP Sensor
    GM260159Courtesy of GENERAL MOTORS COMPANY
  4. Remove the MAP sensor (1) from the intake manifold.
About FixVault