FixVault
Home › Chevrolet › 2001 › Tracker 2D Utility, 4WD, Automatic › Repair and Diagnosis › Engine Mechanical › Starter › Starting System › Bench Testing › Solenoid Pull-In & Hold-In Resistance Test

Solenoid Pull-In & Hold-In Resistance Test

  1. Using an ohmmeter, measure resistance between solenoid terminal "S" and terminal "M". If resistance is 5.0 ohms or less, pull-in coil is open. Replace solenoid.
  2. Using an ohmmeter, measure resistance between solenoid terminal "S" and solenoid housing. If resistance is 5.0 ohms or less, hold-in coil is open. Replace solenoid.
About FixVault