FixVault
Home › Chevrolet › 2001 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Body & Frame › Door Locks › Power Door Lock System & Remote Keyless Entry System › Programming › Feature Customization Modes › Last Door Closed Locking & Lockout Prevention Modes

Last Door Closed Locking & Lockout Prevention Modes

  1. Enter feature customization mode. See ENTER FEATURE CUSTOMIZATION MODE  . Press and release power door lock switch to UNLOCK position. Count number of chimes to determine current mode (1-4). See LAST DOOR CLOSED LOCKING & LOCKOUT PREVENTION MODES  table.
    LAST DOOR CLOSED LOCKING & LOCKOUT PREVENTION MODES

    Mode Last Door Closed Locking Lockout Prevention
    1 Disabled Disabled
    2 Disabled Enabled
    3 Enabled Disabled
    4 Enabled Enabled
  2. To change mode, press and release power door lock switch to UNLOCK position until desired mode is reached. Chime will sound number of times equivalent to mode. Chime indicator sequence will repeat after chime sounds for mode 4. Mode 4 is default mode.
  3. To exit and save current feature customization mode settings, turn ignition switch to OFF position. Reinstall BCM PRGRM (10-amp) fuse. If unable to change modes, diagnose power door lock system fault. See DOORS DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
About FixVault