Removal & Installation: Notes
WARNING:
Vehicles are equipped with air bag supplemental restraint system. Before attempting any repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in appropriate AIR BAG RESTRAINT SYSTEMS article.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE:
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 1997-2001 Chevrolet Venture, Pontiac Montana/Trans Sport and Oldsmobile Silhouette model vehicles equipped with RPO E58, passenger side power sliding door. Some of these vehicles exhibit a condition in which sliding door closes, but is not latched. If power sliding door opens while vehicle is in motion, particularly when vehicle ascends a hill, makes a turn, or travels over a rough road surface, an unrestrained occupant could fall out of van and be injured. See National Highway Safety and Transportation Administration (NHTSA) safety recalls 01V067000 and 01V264000. Manufacturers safety recall campaign numbers are 01013 and 01059.
NOTE:
Use correct fastener in correct location. Replacement fasteners must be correct part number for that application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.