FixVault
Home › Chevrolet › 2002 › Astro Van Passenger, AWD › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls Removal & Installation › Fuel Systems › Fuel Pump › Removal

Fuel Pump: Removal

  1. Fuel pump is located in fuel tank and is integral with fuel sending unit assembly. Remove fuel tank. See FUEL TANK  .
    2. CAUTION: Use safety glasses when using compressed air to prevent eye injury.
    NOTE: DO NOT handle the fuel sending unit assembly by the fuel pipes. The amount of leverage generated by handling the fuel sending unit assembly by the fuel pipes could damage the joints.
  2. Using compressed air, clean area at top of fuel tank around any fittings to be disconnected. Disconnect EVAP and fuel lines at fuel sending unit. See FUEL LINE DISCONNECT FITTINGS  . Disconnect electrical connections at fuel sending unit.
  3. Remove fuel sending unit assembly retaining ring using Retaining Ring Remover/Installer (J-39765). Lift fuel sending unit assembly from fuel tank. Drain any fuel from the fuel sending unit into an approved container. Remove and discard fuel sending unit "O" ring.
About FixVault