FixVault
Home › Chevrolet › 2002 › Corvette Base, 2D Convertible, Automatic › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Child Restraint Tether Anchor Replacement › Removal Procedure

Removal Procedure

  1. Remove the child restraint tether strap from the anchor plate, if the child restraint is installed.
  2. Reposition the rear compartment floor carpet to expose the anchor plate bolt.
  3. Remove the bolt and the anchor plate.
    Fig 1: Removing Child Restraint Tether Anchor Mounting Bolt
    G01735053Courtesy of GENERAL MOTORS CORP.
About FixVault