FixVault
Home › Chevrolet › 2002 › Impala LS › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Repair Instructions › Antenna Module Replacement › Installation Procedure

Installation Procedure

  1. Position the antenna amplifier to the LH rear window inner upper panel. Install the antenna amplifier bolt. Tighten the antenna amplifier bolt to 3 N.m (27 lb in).

    Important:  The antenna coaxial cable uses a sliding snap-lock. Holding the sliding lock feature will prevent installation.

  2. Connect the antenna amplifier electrical connectors:
    1. 2.1. Position the antenna coaxial cable behind the sliding lock feature.
    2. 2.2. Install the antenna coaxial cable to the sliding lock feature.

    Important:  If the wiring clip is faulty, the wiring clip must be replaced prior to installation.

  3. Install the antenna leads to the rear window terminals. Push the wiring clip on the upper lead into the hex hole in the metal.
About FixVault