FixVault
Home › Chevrolet › 2002 › Impala LS › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Strut Assembly Replacement › Installation Procedure

Installation Procedure

  1. Install the strut.
  2. Install the strut upper nuts. Tighten the strut upper nuts to 33 N.m (24 lb ft).
  3. Install the strut lower bolts and nuts.

    Important:  This is a prevailing torque type fastener. This fastener may be reused ONLY if:

    • The fastener and its counterpart are clean and free from rust.
    • The fastener develops 3 N.m (27 lb in) of torque/drag against its counterpart prior to the fastener seating.

    If the fastener does not meet these criteria, REPLACE the fastener.

  4. Align the strut to the mark on the knuckle. Tighten the strut lower nuts to 122 N.m (90 lb ft).
  5. Install the tire and wheel.
  6. Lower the vehicle.
  7. Align the front wheels. Refer to SPECIFICATIONS .
About FixVault