FixVault
Home › Chevrolet › 2002 › Malibu Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle Servicing › Removal & Installation › Transaxle Mount Assembly (Side) › Installation

Transaxle Mount Assembly (Side): Installation

  1. Transfer the rear upper mount to the new mount. Position the mount and start the rear upper bolt into the threads. Install the remaining 3 bolts. Tighten all 4 of the mount bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install the mount-through bolt. Tighten the mount-through bolt to specification. See TORQUE SPECIFICATIONS .
  3. Remove the jackstand and the wood block. Install the left splash shield.
  4. Install the left tire and wheel assembly. Lower the vehicle.
About FixVault