FixVault
Home › Chevrolet › 2002 › Monte Carlo LS › Repair and Diagnosis › External Pages › Different car › Section 548 (Data Link Communication System) › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Data Link Connector
    GM658375Courtesy of GENERAL MOTORS CORP.
  1. Position the data link connector to the instrument panel.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws to the data link connector.

    Tighten:  Tighten the data link connector screws to 2 N.m (18 lb in).

About FixVault