Removal Procedure

Using a taped flat bladed tool, gently pry and release the 4 clips around the lamp dimmer switch/remote control rearview mirror switch trim plate (2).

Fig 1: Releasing 4 Clips Around Lamp Dimmer Switch/Remote Control Rearview Mirror Switch Trim Plate
Courtesy of GENERAL MOTORS CORP.
Disconnect the outside remote control rearview mirror switch electrical connector (1).

Fig 2: Disconnecting Outside Remote Control Rearview Mirror Switch Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Remove the outside remote control rearview mirror switch from the trim plate by depressing the 4 retaining tabs.