FixVault
Home › Chevrolet › 2002 › Tracker 2D Utility, 4WD, Automatic › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Control Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Installing Cruise Control Switch
    GM812034Courtesy of GENERAL MOTORS CORP.
  1. Connect the cruise control switch electrical connector.
  2. Install the cruise control switch to the instrument panel. Ensure that the retaining tabs are fully engaged.
  3. Install the IP cluster trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
About FixVault