FixVault
Home › Chevrolet › 2002 › Tracker 2D Utility, RWD, Automatic › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System - 4WAL › Repair Instructions › Lamp Driver Module Replacement › Installation Procedure

Installation Procedure

  1. Install the LDM (1) to the printed circuit.
    2. Fig 1: Installing Lamp Driver Module To Printed Circuit Board
    G01710461Courtesy of GENERAL MOTORS CORP.
  2. Install the Instrument Cluster Assembly (2). Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.
  3. Perform Diagnostic System Check - ABS .
About FixVault