Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Tracker. However, it is still accessible from the selected car via links, so may be relevant.

Place the remote control door lock receiver transmitter face down on a clean surface.
Insert a small screwdriver into the slot on the bottom of the transmitter.
Carefully turn the screwdriver in the slot until the rear cover releases.

Fig 1: Placing Remote Control Door Lock
Courtesy of GENERAL MOTORS CORP.
Remove the rear cover (1) while being careful not to damage the seal (4).
Remove the battery (2) from the transmitter (3).

Fig 2: Removing Battery From Transmitter
Courtesy of GENERAL MOTORS CORP.