FixVault
Home › Chevrolet › 2002 › Venture Plus › Repair and Diagnosis › Body & Frame › Mirrors › Door System, Mirror System & Window System › Repair Instructions › Power Sliding Door (PSD) Open/Close Pillar Switch Replacement › Removal Procedure

Removal Procedure

  1. Turn off the PSD from the roof console switch bank.
  2. Remove the PSD OPEN/CLOSE switch from the center pillar.
  3. Disconnect the electrical connector from the PSD OPEN/CLOSE switch.
    Fig 1: Removing PSD OPEN/CLOSE Switch From Center Pillar
    G01813979Courtesy of GENERAL MOTORS CORP.
About FixVault