Installation Procedure
WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the washer solvent level sensor grommet into the container.
- Install the washer solvent level sensor (9) into the washer solvent container.
- Apply downward pressure in order to seat the level sensor to the level sensor the grommet.
- The level sensor will snap into the washer solvent container.
- Connect the electrical connector (8) to the washer solvent level sensor (9).
- Install the lower air deflector. Refer to AIR DEFLECTOR REPLACEMENT - FRONT .
- Fill the washer solvent container