Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
Important: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
Install the battery ground (negative) cable and bolt to the battery.
Tighten
Tighten the battery terminal bolt to 16 N.m (12 lb ft).