FixVault
Home › Chevrolet › 2002 › Venture Plus › Repair and Diagnosis › External Pages › Different car › Section 85 (Disc Brakes) › Disc Brake Specifications

Disc Brake Specifications

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
FRONT DISC BRAKE SPECIFICATIONS

Application In. (mm)
Caliper Bore Diameter 2.5 (63.52)
Disc Diameter 11.8 (300)
Lateral Runout .002 (.05)
Parallelism .0005 (.013)
Original Thickness 1.267 (32.18)
Minimum Refinished Thickness (1) 1.224 (31.09)
Discard Thickness (2) 1.200 (25.4)
Master Cylinder Bore Diameter 1.00 (25.4)
(1) Surface rotors if scoring, flatness, rotor lateral runout or parallelism are excessive. Light scoring of less than .060" (1.5 mm) does not require rotor surfacing.
(2) Discard dimension cast into rotor is for wear and does not apply to minimum refinished thickness.
REAR DISC BRAKE SPECIFICATIONS

Application In. (mm)
Caliper Bore Diameter 1.5 (38.00)
Disc Diameter 11.6 (295)
Lateral Runout .002 (.05)
Parallelism .0005 (.013)
Original Thickness .433 (11.00)
Minimum Refinished Thickness (1) .423 (10.75)
Discard Thickness (2) .374 (9.50)
(1) Surface rotors if scoring, flatness, rotor lateral runout or parallelism are excessive. Light scoring of less than .060" (1.5 mm) does not require rotor surfacing.
(2) Discard dimension cast into rotor is for wear and does not apply to minimum refinished dimension.
About FixVault