FixVault
Home › Chevrolet › 2002 › Venture Value › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Repair Instructions › Seat Switch Replacement - Power › Installation Procedure

Installation Procedure

  1. Connect the adjuster switch electrical connector.
  2. Install the adjuster switch to the finish cover.
  3. Install the finish cover to the seat adjuster.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the finish cover screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  5. Connect the front seat pretensioner electrical connector.
  6. Connect the front seat SIR module electrical connector.
    Fig 1: Installing Finish Covers To Front Seat Frame
    G01814298Courtesy of GENERAL MOTORS CORP.
About FixVault