Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector (1) to the inflator switch (2).
Install the inflator switch in the accessory inflator control panel.
Install the lower rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER LOWER in Interior Trim.
Install the inflator fill valve access cover.

Fig 1: Connecting Electrical Connector To Inflator Switch
Courtesy of GENERAL MOTORS CORP.