STOPLAMP Switch: Installation
WARNING: This page is about a different car, the 2002 Cadillac Seville and 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the stoplamp/ABS/shift lock control switch electrical connectors (2). See Figure .
- Install the stoplamp switch into the retainer.
- Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel. See Figure .
- Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position. Install sound insulator.