Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Install the step pad (1) on the bumper (4).
Align the tangs on the step pad with the slots in the bumper.
Using a rubber mallet, set the tangs in place starting at the center of the step pad and work toward each end of the pad.

Fig 1: Installing Rear Bumper Step Pad
Courtesy of GENERAL MOTORS CORP.