FixVault
Home › Chevrolet › 2003 › Chevy Express H2500 › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

  1. Perform the following to install the door lock receiver (1) to the door lock receiver bracket.

    Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.

  2. Connect the electrical connector (1) to the door lock receiver (2).
  3. Install the I/P trim panel. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER .
    Fig 1: Installing Remote Control Door Lock Receiver
    G02422694Courtesy of GENERAL MOTORS CORP.
About FixVault