FixVault
Home › Chevrolet › 2003 › Chevy Express H2500 › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the engine protection shield.
    Fig 1: Installing Engine Protection Shield
    G02423610Courtesy of GENERAL MOTORS CORP.
  2. Install the engine protection shield mounting bolts, light duty shown, heavy duty similar.

    Tighten 

    Tighten the bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
    Fig 2: Installing Engine Protection Shield Mounting Bolts
    G02423611Courtesy of GENERAL MOTORS CORP.
About FixVault