FixVault
Home › Chevrolet › 2003 › Chevy Express H2500 › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the engine protection shield mounting bolts, light duty shown, heavy duty similar.
    Fig 1: Removing Engine Protection Shield Mounting Bolts
    G02423608Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine protection shield.
    Fig 2: Removing Engine Protection Shield
    G02423609Courtesy of GENERAL MOTORS CORP.
About FixVault