FixVault
Home › Chevrolet › 2003 › Corvette Base, 2D Convertible, Automatic › Repair and Diagnosis › Electrical › Body Electrical › Engine Controls - PID Values, Pcm Connector Views And Terminal Identification › Scan Tool Data List Definitions

Scan Tool Data List Definitions

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE: See appropriate PID VALUE chart for specific PID application.

The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.

  1. All

    The parameter is in all data lists indicated below.

  2. Eng 1

    Engine Data 1 List

  3. Eng 2

    Engine Data 2 List

  4. Eng 3

    Engine Data 3 List

  5. CC

    Cruise Control Data

  6. EE

    Enhanced EVAP Data

  7. FT

    Fuel Trim Data List

  8. MF

    Misfire Data List

  9. TAC

    TAC Data List
About FixVault