FixVault

Removal Procedure

  1. Remove the door sill plate. Refer to DOOR SILL PLATE REPLACEMENT in Interior Trim.
  2. Remove the lock pillar trim panel. Refer to TRIM REPLACEMENT - LOCK PILLAR (UPPER CONVERTIBLE) or TRIM REPLACEMENT - LOCK PILLAR (COUPE) or TRIM REPLACEMENT - LOCK PILLAR (LOWER CONVERTIBLE AND HARD TOP) in Interior Trim.
  3. Disconnect the electrical/audio connector (3) from the antenna module (6).
  4. Disconnect the following three coaxial cables from the antenna module (6).
    • Rear lift window antenna extension (1)
    • Radio control (4)
    • Front windshield antenna (5)
  5. Remove the screws retaining the antenna module (6) to the lock pillar.
  6. Remove the antenna module (6).
    Fig 1: Antenna Module
    G01453543Courtesy of GENERAL MOTORS CORP.