Installation Procedure

Fig 1: Armrest Pull Cup & Screws (Impala)

Courtesy of GENERAL MOTORS CORP.

Install the front door power mirror switch to the front door armrest pull cup. Refer to Power Mirror Switch Replacement (Impala) or Power Mirror Switch Replacement (Monte Carlo) .
Install the front and/or rear door armrest power window switch to the front and/or rear door armrest pull cup.
- For the front door refer to Power Window Switch Replacement (Impala) or Power Window Switch Replacement (Monte Carlo) .
- For the rear door refer to Power Window Switch Replacement - Rear Door (Impala) .
Install the front and/or rear door armrest pull cup to the front and/or rear inner door trim panel pressing into place until fully seated.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the screws to the front and/or rear door armrest pull cup
Tighten: Tighten the screws to the front and/or rear door armrest pull cup to 6 N.m (53 lb in).