FixVault
Home › Chevrolet › 2003 › Malibu Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle Servicing › Removal & Installation › Intermediate/4TH Servo Assembly › Installation

Intermediate/4TH Servo Assembly: Installation

  1. Assemble the intermediate/4th servo assembly.
  2. Install the intermediate/4th band servo piston spring, the servo and the servo cover bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the oil feed pipes. See OIL FEED PIPES  .
  4. Install the filter and the oil pan. See DRAINING & REFILLING  under REMOVAL & INSTALLATION.
  5. Lower the vehicle.
  6. Fill the transaxle with appropriate fluid to proper level. See LUBRICATION  .
About FixVault