FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Repair Instructions › Antenna Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of Antenna Module
    GM1337886Courtesy of GENERAL MOTORS CORP.
  1. Connect the connector at the windshield.
  2. Connect the coax cable.
    3. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the bolt securing the antenna module to the vehicle.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  4. Install the windshield garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.
About FixVault