FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Body & Frame › Windows › Door System, Mirror System & Window System › Repair Instructions › Hinge Replacement - Door › Removal Procedure

Removal Procedure

    IMPORTANT: In order to minimize door realignment, do not remove both hinges at the same time. Replace the broken door hinge first.
  1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  2. Remove the front wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.
  3. Remove the front fender. Refer to Fender Replacement - Front in Body Front End.
    4. Fig 1: Harness Grommet At Hinge Pillar
    GM63821Courtesy of GENERAL MOTORS CORP.
  4. Mark the location of the door hinge on the door and on the hinge pillar.
  5. Support the door.
    6. Fig 2: View Of Hinge Bolt Mounting Locations
    GM63776Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts securing the door hinge to the hinge pillar.
    7. Fig 3: Upper Hinge At Door Bolts
    GM63779Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolts securing the door hinge to the door.
  8. Remove the door hinge.
About FixVault