FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  1. Install the CMP sensor.
  2. Install the CMP sensor retaining bolt.

    Tighten:  Tighten the bolt to 29 N.m (21 lb ft).

  3. Connect the CMP sensor electrical connector.
  4. Install intake manifold. Refer to Intake Manifold Replacement .
About FixVault