FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove intake manifold. Refer to Intake Manifold Replacement .
  2. Disconnect the electrical connector from the camshaft position (CMP) sensor.
    3. IMPORTANT: Clean the area around the CMP sensor before removal in order to prevent debris from entering the engine.
    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor retaining bolt.
  4. Remove the CMP sensor.
About FixVault