FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Disconnect the electrical connection from MAF/IAT sensor.
  3. Remove air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  4. Loosen clamp (2) retaining MAF/IAT to upper air box.
    5. Fig 1: Identifying MAF/IAT Sensor
    GM1275969Courtesy of GENERAL MOTORS CORP.
  5. Remove MAF/IAT (1) sensor from vehicle.
About FixVault