FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Throttle Actuator Control (TAC) Module Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install TAC module and retaining nuts

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  2. Connect TAC module electrical connectors.
  3. Position bulk wiring harness connectors back into place.
About FixVault