FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Inflatable Restraint System › Repair Instructions › Inflatable Restraint Seat Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Seat Position Switch, Electrical Connector & Retaining Nuts
    GM1200367Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the seat position switch (3) to the seat rail with 2 nuts (2).

    Tighten:  Tighten the seat position switch nuts to 4 N.m (35 lb in).

  2. Connect the electrical connector (1) to the seat position switch (3).
  3. Install the seat in the vehicle. Refer to Seat Replacement in Seats.
About FixVault