FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Inflatable Restraint System › Repair Instructions › Inflatable Restraint Seat Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Seat Replacement in Seats.
  2. Ensure that the seat is in the full forward position.
    3. Fig 1: Identifying Seat Position Switch, Electrical Connector & Retaining Nuts
    GM1200367Courtesy of GENERAL MOTORS CORP.
  3. Locate the seat position switch (3) under the seat on the inside of the inner seat rail.
  4. Disconnect the electrical connector (1) from the seat position switch (3).
  5. Remove the 2 nuts (2) that retain the seat position switch to the seat rail.
  6. Remove the seat position switch from the seat.
About FixVault