FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Retractor Anchor Plate Replacement › Installation Procedure

Installation Procedure

  1. Position the seat belt retractor anchor plate into the vehicle.
    2. Fig 1: View of Seat Belt Retractor Anchor Plate
    GM1344148Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Tighten the seat belt retractor anchor plate.

    Tighten:  Tighten the seat belt retractor anchor plate to 70 N.m (52 lb ft).

  3. Install the seat belt. Refer to Seat Belt Replacement - Front .
About FixVault