FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Ignition Lock Cylinder Case Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Ignition Lock Cylinder Case Assembly & Screws
    GM664260Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR CAUTION in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the turn signal cancel cam and upper bearing. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement .
  3. Remove the ignition switch assembly. Refer to Ignition Switch Replacement .
  4. Remove 3 pan head tapping screws (2) from the ignition lock cylinder case assembly (1).
  5. Remove the ignition lock cylinder case from the steering column.
About FixVault