FixVault
Home › Chevrolet › 2003 › SSR Base › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Wheel Stud Replacement › Installation Procedure

Installation Procedure

  1. Install the wheel stud to the wheel hub and bearing.
    2. Fig 1: Installing Wheel Stud
    GM161272Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install 4 washers and the nut to the wheel stud.

    Tighten:  Tighten the wheel stud nut to 130 N.m (95 lb ft), drawing in the wheel stud.

  3. Remove the nut and the washers.
  4. Install the rotor. Refer to INSTALLATION in Disc Brakes.
  5. Install the tire and the wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
About FixVault