FixVault
Home › Chevrolet › 2003 › Tracker 2D Utility, 4WD, Standard › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Child Tether Anchor Bracket Replacement - Rear Sill › Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the rear sill child seat anchor bracket (2) to the vehicle. Secure the rear sill bracket with the bolt (3).

    Tighten 

    Tighten the rear sill child seat anchor bracket bolt to 35 N.m (25 lb ft).

  2. Install the rear sill child seat anchor bracket trim cover (1) to the rear sill bracket (2).
    Fig 1: Rear Sill Child Seat Anchor Bracket Trim Cover
    G01409145Courtesy of GENERAL MOTORS CORP.
About FixVault