FixVault
Home › Chevrolet › 2003 › Tracker 2D Utility, RWD, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pressure Switch Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the electrical connector (1) from power steering pressure (PSP) switch.
  2. Remove the PSP switch (2) from the power steering pump (3).
    Fig 1: Removing PSP Switch From Power Steering Pump
    G01469157Courtesy of GENERAL MOTORS CORP.
About FixVault