Low-Reverse Servo Assembly: Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the low-reverse servo.
- Install the low and the reverse band servo and cover. See Figure . Install and tighten the bolts to specification. See TORQUE SPECIFICATIONS .
- Install the oil feed pipe. See OIL FEED PIPES .
- Install the oil filter and pan. See DRAINING & REFILLING under LUBRICATION.
- Lower the vehicle.
- Connect the negative battery cable.
- Fill transaxle with appropriate fluid to proper level. See LUBRICATION .