Conditions For Running DTC

DTCs P0102, P0103, P0106, P0107, P0108, P0120, P0220, P0442, P0443, P0446, P0449, P0455, P0496, P2135 are not set.
The engine is cranking or running.
The ignition 1 signal is between 11 volts and 18 volts.
The Throttle Position (TP) sensor angle is less than 95 percent.
The change in the TP sensor angle is less than 5 percent.
The MAP sensor is more than 17 kPa.
The change in the MAP sensor is less than 3 kPa.
The above conditions are met for 1.5 seconds.