FixVault
Home › Chevrolet › 2003 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Data Link Communications System › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

  1. Place the data link connector into position.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Instal the bolts/screws to the data link connector.

    Tighten 

    Tighten the bolts/screws to 2 N-m (18 lb in.).

    Fig 1: Installing Lower Data Link Connector
    G01533997Courtesy of GENERAL MOTORS CORP.
About FixVault