Installation Procedure

Connect the electrical connectors to the DVD player.

Fig 1: Connecting Electrical Connectors To DVD Player
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Slide the DVD player inward and fasten with screws.
Tighten

Tighten the screws to 2 N.m (18 lb in).
Install the bezel to the floor console. Refer to POWER ACCESSORY PORT REPLACE - FRONT FLOOR CONSOLE .

Fig 2: Installing Bezel To Floor Console
Courtesy of GENERAL MOTORS CORP.