FixVault
Home › Chevrolet › 2003 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Wiper Motor Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the wiper arms. Refer to WIPER ARM REPLACEMENT   .
  2. Remove the air inlet grille panel. Refer to AIR INLET GRILL PANEL REPLACEMENT  in Body Front End.
  3. Remove the cruise control and bracket. Refer to CRUISE CONTROL MODULE REPLACEMENT  in Cruise Control.
  4. Remove the wiper motor. Refer to WIPER MOTOR REPLACEMENT   .
  5. Remove the wiper drive system module screws.
  6. Remove the wiper drive system module from the vehicle.
    Fig 1: Removing Wiper Drive System Module From Vehicle
    G01534202Courtesy of GENERAL MOTORS CORP.
About FixVault