FixVault
Home › Chevrolet › 2003 › Venture Base, Van Passenger Extended › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › LED Indicator Replacement - Vehicle Security System › Installation Procedure

Installation Procedure

  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp to the instrument panel upper trim:
    1. Insert the lamp.
    2. Rotate the lamp clockwise to approximately 1/4 turn.
  3. Install the instrument panel upper trim. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER  in Instrument Panel, Gages and Console.
    Fig 1: Installing Security Indicator Lamp To Instrument Panel Upper Trim
    G01534656Courtesy of GENERAL MOTORS CORP.
About FixVault