FixVault
Home › Chevrolet › 2003 › Venture Base, Van Passenger Extended › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission Servicing › Removal & Installation › Transaxle Mount & Bracket › Installation

Transaxle Mount & Bracket: Installation

  1. Position the transaxle mount to the frame.
  2. Install the transaxle mount bracket bolts. See Figure . Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Remove the utility stand.
  4. Install the transaxle mount upper nuts. See Figure . Tighten the transaxle mount upper nuts to specification. See TORQUE SPECIFICATIONS  .
  5. Install the left engine splash shield.
  6. Install the left front tire and wheel.
  7. Lower the vehicle.
About FixVault