FixVault
Home › Chevrolet › 2004 › Astro Van Cargo, AWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Back Frame Replacement - Front › Installation Procedure

Installation Procedure

  1. Install the seat back frame.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the seat back hinges on the right and left side.

    Tighten:  Tighten the bolts to the seat back hinges on the right and left side to 30 N.m (22 lb in).

    Fig 1: Locating RH Seat Back Hinge Bolts
    GM300213Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar support cable. Refer to Lumbar Support Cable Replacement .
  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7) .
    Fig 2: Seat Back Cover View
    GM300212Courtesy of GENERAL MOTORS CORP.
  5. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
About FixVault